Bathtub Refinishing Is Not Always an Alternative
For a very long time, bathtub resurfacing was thought to be the best method of bathtub repair. It is less messy, more affordable, and extremely easy. Most importantly, refinishing the tub is around half the price of replacing it. And it won't just disappear quickly; it will last for a very long time!
Resurfacing is not a guarantee that the bathtub repairs will be solved, though. The original surface must be in good condition because nothing is changed while resurfacing. Get the best Bathtub Refinishing Portland at A&R Refinishing Services who are committed to help families.
Resurfacing is not indicated for the following problems:
- Tubs with flaws
Fiberglass is prone to breaking and can develop two different types of cracks:
The surface of the first kind of crack develops into a web-like structure as a result of the gel coat drying out over time. Simple resurfacing work can be used to repair this kind of crack. Without worrying about the cracks reoccurring, one can sand them down and make repairs.
The structural crack is the second category of crack. Resurfacing won't be able to solve this. While resurfacing can temporarily conceal these flaws, it is a fruitless solution over the long haul. Resurfacing does not address the root source of the structural faults; it merely covers them. The cracks beneath it are still present, serving only as a cosmetic repair.
Today, businesses can inject a pressure-absorbing foam under the tub, helping to stop further damage. However, where water starts to seep in through the cracks, this repair does not hold. It is advised to replace the tub in such cases.
- Rust is emanating from the tub's back.
Rust and cancer are comparable. It eventually spreads to every area of the tub. Therefore, the best course of action is to treat only the rust-affected region. Rusting is a process that cannot be stopped once it starts. The tub's lifespan may be increased with resurfacing. Unfortunately, it is not a long-term solution that is assured. The issue of surface rust is unimportant. However, rather than resurfacing, tubs that require body repairs because of rusted holes or rust from underneath the tub should be replaced. If rust damage existed in the region before the tub's resurfacing, it is crucial to keep an eye on it.
Refinishing a bathtub takes about 4 to 5 hours. The tub will need another 1.5 days to cure; most people round up to 2 days just to be safe. If one wants a finish that is strong and long-lasting, the cure time is crucial. Clearly, tub refinishing is much less expensive than tub replacement. Except occasionally a bathtub is too old to be fixed, leaving with little choice but to replace it. Even after refinishing, bathtubs can survive up to 20 years. Bathtubs have a very long lifespan, especially if they are properly maintained and refinished throughout the course of their lifetime by the Refinishing Company Washington.
Comments