SVR Global is the most reputed and leading Triple offset butterfly valve manufacturer in USA supplying top quality valves to oil and gas industries, petroleum industries and marine industries in Boston, Salt lake City and Denver. A triple offset butterfly valve is a type of industrial valve that is designed to regulate or isolate the flow of fluid or gas in a pipeline. It is called a "triple offset" valve because it has three levels of offset between the center of the valve disc and the center of the pipe, which provides a tight seal and minimizes friction.
Unlike other butterfly valves that use a circular disc with a shaft in the center, a triple offset butterfly valve has a disc that is elliptical in shape and rotated on an axis that is offset from the center of the valve body. This design provides a more precise and reliable seal that is less prone to wear and tear over time.
Triple offset butterfly valves are commonly used in applications where high temperatures, high pressures, or corrosive fluids are present, such as in oil and gas pipelines, power plants, and chemical processing plants. They are also used in applications where tight shutoff is required, such as in the oil and gas industry or in fire protection systems.
PARTS
· Body: The main housing of the valve that contains the internal components and provides the connection points for the pipeline.
· Seat: The component that provides a seal against the valve disc. The seat is typically made of a resilient material such as rubber, elastomer, or PTFE.
· Disc: The component that controls the flow of fluid or gas through the valve. The disc is mounted on the shaft and rotates to open or close the valve.
· Shaft: The component that connects the valve disc to the actuator. The shaft is typically made of a high-strength material such as stainless steel.
· Actuator: The component that controls the movement of the valve disc. The actuator can be either manual, electric, pneumatic, or hydraulic.
· Stem: The component that connects the valve disc to the actuator. The stem is typically made of a high-strength material such as stainless steel.
· Bearings: The components that support the valve disc and allow it to rotate smoothly. The bearings are typically made of a low-friction material such as Teflon or graphite.
· Bolts: The fasteners that secure the valve body and other components together.
· Gasket: The component that provides a seal between the valve body and the pipeline flanges.
Types:
· Wafer triple offset butterfly valves: These valves are designed to fit between two flanges without using bolts and nuts for each flange. They are lighter and more compact than other types of valves, making them ideal for use in applications where space is limited.
· Lug triple offset butterfly valves: These have threaded inserts (lugs) on either side of the valve body that can be bolted to the pipeline. They are commonly used in applications where the valve needs to be removed frequently for maintenance or repair.
· Flanged triple offset butterfly valves: These valves have flanges on either side of the valve body that are bolted to the pipeline. They are commonly used in applications where the valve needs to be permanently installed and does not need to be removed frequently.
ADVANTAGES
· Flow regulation of crude oil in oil pipelines
· Control of cooling water in power generation plants
· Handling of corrosive chemicals in chemical processing plants
· Flow control of steam in industrial boilers
· Flow regulation of abrasive slurries in mining operations
· Control of fuel handling in power plants
· Fire protection systems in industrial and commercial buildings
INDUSTRIES
· Chemical Industry
· Oil & Gas Industry
· Petrochemical Industry
· Energy Industry
· LNG & LPG
· Marine Industry
· Textile industry
· Mining industry
APPLICATIONS
· Oil and Gas Industry: Triple offset butterfly valves are commonly used in oil and gas pipelines, refineries, and offshore platforms for regulating the flow of crude oil, natural gas, and other fluids.
· Chemical Industry: Triple offset butterfly valves are widely used in chemical processing plants for handling corrosive and hazardous chemicals. They are also used in water treatment facilities for regulating the flow of chemicals.
· Power Generation: Triple offset butterfly valves are used in power generation plants for regulating the flow of steam, water, and other fluids in the system. They are also used in cooling water systems, air handling systems, and fuel handling systems.
· Marine Industry: Triple offset butterfly valves are used in the marine industry for regulating the flow of seawater and other fluids. They are used in ballast systems, fire protection systems, and other critical applications.
· Mining Industry: Triple offset butterfly valves are used in the mining industry for handling slurries, tailings, and other abrasive fluids. They are used in mineral processing plants, tailings disposal systems, and other applications.
· Water Treatment Industry: Triple offset butterfly valves are used in water treatment plants for regulating the flow of water and chemicals. They are used in filtration systems, chemical dosing systems, and other critical applications.
· Pulp and Paper Industry: Triple offset butterfly valves are used in the pulp and paper industry for regulating the flow of pulp, chemicals, and other fluids. They are used in paper mills, bleaching systems, and other critical applications.
SVR Global is the Triple Offset Butterfly Valve manufacturer in USA and has the following technical description-
Class: ANSI 150 to 600, PN10 to PN100
Material: cast iron, carbon steel, duplex steel, ductile iron, stainless steel (SS304, SS316, F304, F316, CF8, CF8M, SS316L, SS409L)
End Connection: wafer, lug, flanged
Size: 2″ to 72”
Operation: electric actuated, pneumatic actuated, handwheel, gear operated
Visit our website for more information-
https://svrglobal.net/products/triple-offset-butterfly-valve/
Comments